Qidi560 Moore M7 Propeller with Metal Hub Set for Brushless RC Plane

Eliminate Plastic Hub Cracks, Prevent Shaft Slippage, and Restore Peak Brushless Thrust

A cracked, stripped, or warped propeller hub on your Qidi560 Moore M7 4CH Brushless RC Plane causes severe blade vibration, motor shaft slippage, and immediate loss of climbing thrust during high-speed maneuvers or off-road grass takeoffs. Soft plastic stock prop mounts often deform under high-RPM brushless torque or shatter during minor nose-first ground strikes. Flying with an unbalanced or slipping blade setup strains your ESC and reduces overall flight efficiency. This official Qidi560 Moore M7 Propeller set with an upgraded metal hub adapter provides the ultimate heavy-duty solution. Engineered with high-strength composite blades and a precision CNC-machined metal hub, it delivers rigid shaft lockup, zero-vibration rotation, and sustained aerobatic power.  Ships worldwide.

Product Highlights

• Heavy-Duty CNC Metal Spinner Hub: Machined from high-grade alloy to eliminate thread stripping, crack damage, and plastic deformation under high torque.

• Optimized High-Efficiency Blade Pitch: Delivers immediate throttle acceleration and high airflow velocity with minimal battery draw.

• Precision 360-Degree Compression Lock: Fits securely over the motor shaft without slipping, slop, or high-speed rotational wobble.

• Impact-Resistant Composite Material: High-toughness molded propeller blades absorb minor ground clips without warping or snapping.

Compatibility

For the Qidi560 Moore M7 4CH Brushless RC Plane only.
Full model page (specs & photos):

https://www.kidstoylover.com/en-sg/products/qidi560-moore-m7-4ch-brushless-rc-plane

What’s in the Box

• 1 x Qidi560 Moore M7 Propeller

Install Tips

• Removing Worn Propeller Assembly: Loosen the front retaining nut or screw, slide the old prop assembly off the motor output shaft, and clean any debris from the shaft surface.

• Seating Metal Hub onto Motor Shaft: Slide the Qidi560 Moore M7 Propeller metal hub sleeve firmly onto the shaft, ensuring it seats flush against the motor housing collar.

• Securing Set Screws & Retaining Nut: Align the prop blades into the metal hub slots, add the locking washer, and tighten the front metal nut firmly using the appropriate tool.

• Pre-Flight Balance & Spin Test: Rotate the blade set by hand to confirm smooth, wobble-free rotation, then apply low throttle on a safe bench to verify balanced airflow before takeoff.

Support & Warranty

• 3-month warranty on manufacturing defects
• Ships worldwide

More Spare Parts & Accessories