P47 Thunderbolt Linkage Set Control Pushrods for 4CH RTF RC Fighter

Restore Crisp Control Response, Eliminate Servo Slop, and Repair Crash Bends

Bent, stretched, or missing pushrod linkages on your P47 Thunderbolt 4Ch RTF RC Fighter directly compromise the accuracy of the Xpilot gyro flight stabilization system. Loose control wires create mechanical play and dead zones at the ailerons, elevator, or rudder, causing sluggish maneuvering, unpredictable pitching, or flutter during high-speed aerobatics and one-key stunt routines. Attempting to manually reshape bent steel wires rarely restores original factory geometry or exact length alignment. This official replacement P47 Thunderbolt Linkage Set completely resolves control surface linkage issues. Precision-formed from high-tensile steel wire, it restores crisp 1-to-1 movement between micro servos and control horns—ensuring your scale warbird responds instantly and stabilizes flawlessly.

Compatibility

For the P47 Thunderbolt Warbird RC Fighter only.
Full model page (specs & photos):
https://www.kidstoylover.com/products/p47-lightning-warbird-rc-fighter

What’s in the Box

• 1 x P47 Thunderbolt Linkage Set

Key Features

• High-Tensile Steel Construction: Engineered from durable, non-flexing steel wire designed to maintain rigid geometry under aerodynamic loads during high-speed maneuvers.

• Pre-Formed Factory End Bends: Features exact z-bends and clevis connectors dimensioned specifically for the P47 Thunderbolt airframe layout for a drop-in fit.

• Zero-Slop Control Transmission: Eliminates free-play at control horn connections, allowing the Xpilot stabilization gyro to execute precise micro-adjustments.

• Complete Control Surface Set: Includes all required pushrod linkages to service aileron, elevator, and rudder control surfaces across the aircraft.

Installation Tips

• Centering Flight Servos First: Power up your transmitter and connect the flight battery to ensure all micro servos automatically hold their neutral center position before attaching pushrods.

• Attaching Pushrod Connectors: Hook the pre-formed Z-bend ends into the micro servo horn arms and snap or thread the outer ends onto the respective wing/tail control horns.

• Leveling Control Surfaces: Fine-tune the linkage lengths until the ailerons, elevator, and rudder rest perfectly flush with the surrounding wing and tail foam edges.

• Pre-Flight Range Check: Manually deflect the transmitter control sticks through their full range of motion to confirm smooth pushrod travel without binding against the EPP foam fuselage.