Main Rotor Blade Propeller Set for RC ERA C190 Brushless Helicopter(Red/Yellow)
Restore Optimal Lift and Flight Efficiency
Chipped, cracked, or unbalanced propellers are the leading cause of "jello" effect in flight and excessive motor strain. These official replacement blades solve flight vibration issues and power loss, ensuring your RC ERA C190 maintains the smooth, quiet, and stable hovering performance it was designed for. Available in vibrant Red and Yellow to match your helicopter's scale aesthetics. Ships worldwide.
Product Highlights
High-Efficiency Aerodynamics: Optimized blade profile provides maximum lift with minimal drag, extending battery life and improving brushless motor efficiency.
Impact-Resistant Material: Constructed from a flexible yet tough composite that absorbs minor strikes without snapping, protecting the main motor shaft.
Factory-Balanced Precision: Each blade is precision-weighted at the factory to eliminate high-speed wobble and protect your rotor head bearings.
Scale Color Matching: Vibrant Red and Yellow finishes provide excellent visual tracking and maintain the professional 1:28 scale look of the C190.
1 x Main Rotor Blade Propeller Set (Select Color: Red or Yellow)
Install Tips
Correct Orientation: Pay close attention to the "A" and "B" or leading-edge markings; installing the blades upside down or on the wrong side will prevent takeoff.
Screw Tension: Tighten the blade bolts so that the blades can still move slightly with firm finger pressure; if they are too tight, the helicopter will vibrate violently during spool-up.
Blade Tracking Check: After installation, spin the rotor at a low RPM to ensure both blades are spinning in the same horizontal plane.
Support & Warranty
Expert help to choose the right RC ERA C190 spare parts
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...