VolantexRC F-16 Brushless Motor - 1109 8500KV High Thrust Replacement
Restore Blistering Speed and Vertical Climb Power
After many flight hours, brushless motors can lose efficiency due to bearing wear or heat stress, resulting in a sluggish takeoff or reduced top speed. This VolantexRC F-16 Brushless Motor solves the problem of power fade. By swapping in this factory-spec 8500KV powerhouse, you'll restore the jet's ability to perform crisp rolls, vertical loops, and the high-velocity passes that the Falcon is famous for. Ships worldwide.
Product Highlights
High-RPM Performance: The 8500KV rating is specifically tuned for the F-16's ducted fan unit, providing the high-velocity airflow needed for jet propulsion.
Efficient Brushless Design: Offers a superior power-to-weight ratio compared to brushed motors, ensuring longer flight times and cooler operation.
Precision Balancing: Factory balanced to minimize vibration, which protects your airframe and ensures the X-PILOT stabilizer gets clean data.
Direct Fit: Pre-sized to fit the internal motor mount of the Volantex 761-10 airframe perfectly.
Direction Check: Before final assembly, plug the motor into the ESC and test the spin direction. If the fan is blowing air forward instead of backward, swap any two of the three motor wires.
Mounting Security: Ensure the mounting screws are tight but do not over-tighten, as the plastic mount can strip. A tiny drop of blue thread locker on the screws is recommended.
Shaft Alignment: Ensure the fan blade is pushed fully onto the motor shaft and secured to prevent slipping at high RPM.
Support & Warranty
Expert help to choose the right VolantexRC F-16 spare parts
Perfetto come primo warbird e approvato dai piloti: MoFly P-51D 690mm vola fluido con 2S, assistenza a 6 assi e pulsanti acrobatici. Guarda test completo & setup.
Perfetto come primo warbird e approvato dai piloti: MoFly P-51D 690mm vola fluido con 2S, assistenza a 6 assi e pulsanti acrobatici. Guarda test completo & setup.
Recensione pratica del QIDI 580 SR22 RTF RC: montaggio in 5 minuti, modalità giroscopiche, prestazioni di volo, consigli per virate coordinate e per chi è indicato.
Recensione pratica del QIDI 580 SR22 RTF RC: montaggio in 5 minuti, modalità giroscopiche, prestazioni di volo, consigli per virate coordinate e per chi è indicato.
Il Trainstar 500mm è l’RTF brushless giusto per te? Tim McKay fa l’unboxing, spiega configurazione e modalità di stabilizzazione e prova il primo volo con 2S: scopri come si comporta...
Il Trainstar 500mm è l’RTF brushless giusto per te? Tim McKay fa l’unboxing, spiega configurazione e modalità di stabilizzazione e prova il primo volo con 2S: scopri come si comporta...