Xiaxiu Sea Land Air Plus Vertical Tail Replacement (Orange/Black/Blue)
Restore Stability to Your 3-in-1 Amphibious RC Plane
Keep your Xiaxiu Sea Land Air Plus flying straight and true with this genuine Vertical Tail (fin) replacement. Designed for the 95 cm 3-in-1 glider that operates on water, land, and air, this color-matched tail restores yaw stability and tracking after crashes, hangar rash, or foam fatigue—so you can get back to smooth takeoffs, steady cruising, and confident turns.
Perfect Fit & Durable Build
Engineered to match the original geometry and airfoil profile, the tail installs cleanly and aligns with the stock horizontal stabilizer. The EPP-style foam construction resists dings and flex while staying lightweight—ideal for a waterproof, brushless-power amphibious platform.
Parent product reference: Sea Land & Air 3-in-1 Large RC Glider (brushless, waterproof)
Not designed for other brands or models.
Color Options
Choose the finish that matches your aircraft or helps with orientation in the sky:
Orange
Black
Blue
What’s Included
1× Vertical Tail (fin) — selected color
Note: Hardware and decals are typically reused from your original tail (no electronics included).
Specifications
Part Type: Vertical Tail / Fin / Vertical Stabilizer
Material: Impact-resistant foam (EPP-style)
Finish: Color-molded surface (Orange/Black/Blue)
Fitment: Direct replacement for Xiaxiu Sea Land Air Plus vertical stabilizer
Quick Installation Tips
Power down & remove the battery before servicing.
Detach the old fin: remove screws or gently separate foam joints.
Dry-fit the new tail to confirm alignment with the fuselage and horizontal stab.
Secure using the original screws. If adhesive is required, use foam-safe CA or UHU POR—avoid hot glue on thin sections.
Verify control alignment (if your model uses a tail skid or linked parts).
Check CG & trim with a short hover/taxi test before your first full flight.
Care & Maintenance
Wipe dry after water operations to protect adhesives and joints.
Store away from heat and direct sun to prevent warping.
Inspect mounting points after hard landings; re-glue foam seams as needed.
FAQs
Q: Will this fit the Sea Land Air Plus brushless 95 cm version? A: Yes—this tail is made specifically for the Xiaxiu Sea Land Air Plus 3-in-1 amphibious plane.
Q: Do I need new screws? A: Most pilots reuse the original hardware. If yours are stripped or missing, replace with equivalent size.
Q: Does the color change flight performance? A: No—color is for visibility and aesthetics only.
Shipping & Support
Ships worldwide with tracking.
3-month warranty against manufacturing defects.
Need help choosing the right part or installing it? Contact us—we’re happy to assist.
First-warbird friendly, pilot-approved: MoFly P-51D 690mm flies smooth on 2S with 6-axis assist and fun stunt buttons. Watch the full test flight & setup.
First-warbird friendly, pilot-approved: MoFly P-51D 690mm flies smooth on 2S with 6-axis assist and fun stunt buttons. Watch the full test flight & setup.
Is the Trainstar 500mm the brushless RTF for you? Tim McKay unboxes it, covers setup and stabilization modes, then test-flies on 2S—see how it really performs.
Is the Trainstar 500mm the brushless RTF for you? Tim McKay unboxes it, covers setup and stabilization modes, then test-flies on 2S—see how it really performs.
Real-world beach test of four Volantex 400mm warbirds—P-51, P-47, Spitfire (maiden) and Corsair. Honest rankings, flight-mode checks…and my pregnant wife flies the P-47!
Real-world beach test of four Volantex 400mm warbirds—P-51, P-47, Spitfire (maiden) and Corsair. Honest rankings, flight-mode checks…and my pregnant wife flies the P-47!
