VolantexRC Trainstar 500mm Brushless RC Plane – 2S/3S Power, RTF

Take your flying skills to the next level with the VolantexRC Trainstar 500mm Brushless RC Plane. Featuring brushless power, 4-channel control, and XPILOT stabilization, this RTF (Ready-to-Fly) plane is perfect for beginners and hobbyists alike. Available in Green and Orange, and compatible with both 2S and 3S battery setups.

Product Review

Accessories

• 2S 7.4V Battery – 400mAh 25C LiPo (for smoother, stable flight)

• 3S 11.1V Battery – 400mAh 25C LiPo (for more power and agility)

• 2S/3S LiPo Balance Charger – B3 V2 (faster charging for both batteries)

• Mode 1 Transmitter – for right-hand throttle users (please add a note “Mode 1” when ordering)

• Replacement Propeller Set – 2pcs for Trainstar 500mm (original spare part, easy to install)

• VolantexRC Trainstar 500mm Front & Rear Wheels Set – for 2S/3S RC Airplane (original spare part, easy to replace)

❓ Trainstar RC Plane – Frequently Asked Questions

✅ Is the RadioMaster TX16S compatible with the Trainstar?

• Yes, the Trainstar uses the V761 protocol

• Supports 4-channel control with TX16S

🛠️ Does the Trainstar have service panels like the Warbirds?

• No, there are no service panels

• The motor can be unscrewed from the front

• The flight board is inside the fuselage and may require cutting into the wing for access

✈️ How well does it slow down? What about flat spins and high alpha?

• On 3S, it’s not a slow flyer, especially with landing gear

• Compared to the Corsair, it stalls more easily during high-G maneuvers

• Stabilized mode makes it much easier to control

• Removing the landing gear and flying on 2S may help with slower flight

• Manual mode on 3S offers great power and fun, but slow flying can be a challenge

🎮 Can you deactivate the gyro?

• Yes, it has 3 flight modes controlled by a switch on the transmitter

• One mode is manual/expert, which disables the gyro

• Switch is typically located on top of the controller

• Explained in the instruction video and labelled on the transmitter

Key Features

• 500mm wingspan brushless RC airplane

• Supports both 2S and 3S LiPo battery configurations

• XPILOT stabilization with Beginner / Intermediate / Expert modes

• One-key aerobatics for flips and rolls

• Durable and lightweight EPP foam fuselage (crash-resistant)

• Off-road landing wheels suitable for grass and pavement

• 2.4GHz radio control system with long-range signal

• Multiple battery configurations available (up to 40min flight on 2S)

Specifications

• Wingspan: 500mm (19.7 inches)

• Length: 398mm (15.6 inches)

• Channels: 4CH (Throttle, Elevator, Rudder, Aileron)

• Motor: Brushless motor system

• Battery options:

  • 2S 7.4V 400mAh LiPo (1 / 2 / 3 batteries)

  • 3S 11.1V 400mAh LiPo (1 / 2 batteries)

• Flight Time:

  • 2S up to 40 minutes (with 3 batteries)

  • 3S up to 20–25 minutes (with 2 batteries)

• Control Distance: Up to 200 meters

• Recommended Age: 14+

• Flight Modes: XPILOT 3-mode flight assist (Beginner / Intermediate / Expert)

• Takeoff Method: Hand launch or ground takeoff

What’s in the Box

• 1x VolantexRC Trainstar 500mm Brushless RC Plane (pre-assembled)

• 1x 2.4GHz Remote Controller (Mode 2)

• 1–3x LiPo Batteries (based on selection)

• 1x USB Battery Charger

• 1x Landing Gear Set (pre-installed)

• 1x Spare Propeller Set

• 1x User Manual (English)

Why Choose the Trainstar 500mm

• Ideal for beginners, intermediate flyers, and gift buyers

• Supports both long-endurance (2S) and high-performance (3S) flight

• Available in two vibrant colors: Green and Orange

• Fully assembled and ready to fly out of the box