Original Landing Gear Skid Set for WLtoys XK K270 UH-60L Black Hawk
Maintain Stable Takeoffs and Safe Landings
Cracked or weakened landing gear often causes the helicopter to tilt or "tip over" during spool-up, leading to expensive blade damage. This original WLtoys K270 Landing Gear set solves the problem of unstable ground handling. By providing a wide and sturdy base, it ensures your Black Hawk sits level for proper gyro initialization and absorbs the impact of firm landings to protect the main fuselage. Ships worldwide.
Product Highlights
Shock-Resistant Composite: Built from a specialized polymer that flexes under pressure to absorb landing energy without snapping.
Precise Mounting Holes: Factory-molded to fit the K270 frame perfectly, ensuring a vibration-free fit that won't rattle during flight.
Protective Clearance: Maintains the correct height to keep the underside of the helicopter and any internal sensors safe from ground debris.
Alignment Check: Ensure the mounting struts are fully seated in the frame slots before tightening any retaining screws to avoid stripping the plastic.
Symmetry: After installation, place the helicopter on a flat surface to verify it sits perfectly horizontal; a tilted stance can affect takeoff performance.
Screw Tension: If your model uses screws for the gear, do not over-tighten them into the plastic chassis to prevent cracking the mounting tabs.
Support & Warranty
Expert help to choose the right WLtoys XK K270 spare parts
Résumé des commentaires sur le biplan A310 (400 mm) : questions les plus fréquentes—vent, trim, CG/« porpoising », conseils de vitesse et appairage radio.
Résumé des commentaires sur le biplan A310 (400 mm) : questions les plus fréquentes—vent, trim, CG/« porpoising », conseils de vitesse et appairage radio.
Idéal pour un premier warbird, approuvé par des pilotes : le MoFly P-51D 690mm vole en douceur en 2S avec aide 6 axes et boutons d’acro. Regardez le vol d’essai...
Idéal pour un premier warbird, approuvé par des pilotes : le MoFly P-51D 690mm vole en douceur en 2S avec aide 6 axes et boutons d’acro. Regardez le vol d’essai...
Test pratique du QIDI 580 SR22 RTF avion RC : montage en 5 min, modes gyroscopiques, performances en vol, astuces pour virages coordonnés et public visé.
Test pratique du QIDI 580 SR22 RTF avion RC : montage en 5 min, modes gyroscopiques, performances en vol, astuces pour virages coordonnés et public visé.
Le Trainstar 500 mm est-il le bon RTF brushless pour vous ? Tim McKay fait le déballage, explique la configuration et les modes de stabilisation, puis effectue un vol d’essai...
Le Trainstar 500 mm est-il le bon RTF brushless pour vous ? Tim McKay fait le déballage, explique la configuration et les modes de stabilisation, puis effectue un vol d’essai...