YuXiang F112S GPS Transmitter Color Screen Remote for AH-1 Cobra RC Helicopter

Restore Real-Time Telemetry Data, Fix Signal Drops, and Replace Damaged Color-Screen Transmitters

A damaged or broken transmitter grounds your YuXiang F112S AH-1 Cobra RC Helicopter and cuts off crucial real-time flight telemetry like satellite lock count, battery voltage levels, and GPS flight modes. Cracking the built-in color display, suffering liquid ingress, or experiencing internal stick module failure severely increases crash risk due to blind flying or unresponsive control stick inputs. Attempting to pair standard non-GPS third-party remotes fails because they lack the dual-way 2.4GHz telemetry protocol and custom interface required for full 9-channel GPS flight mode toggles. This official replacement YuXiang F112S GPS Transmitter completely resolves control connection and telemetry issues. Featuring a vibrant color display and pre-configured Mode 2 (left-hand throttle) factory firmware, it delivers precise flight control and real-time telemetry back to your hands.  Ships worldwide.

Product Highlights

• Vibrant High-Resolution Color Screen: Displays real-time flight status including GPS satellite connections, battery voltage, signal strength, and active flight modes.

• 2.4GHz Bi-Directional Telemetry Protocol: Ensures stable, long-range anti-interference control while continuously receiving flight data from the helicopter's main control system.

• Factory-Configured Mode 2 (Left-Hand Throttle): Comes pre-loaded with official factory firmware for smooth, familiar stick control over throttle, pitch, roll, and yaw.

• Dedicated Flight Mode Toggle Switches: Features pre-mapped physical switches for GPS hover, return-to-home (RTH), manual mode, and 9-channel scale function triggers.

Compatibility

For the YuXiang F112S 9CH GPS RC Helicopter only.

Full model page (specs & photos):

https://www.kidstoylover.com/en-us/products/yuxiang-f112s-9ch-gps-rc-helicopter

What’s in the Box

• 1 x YuXiang F112S GPS Transmitter

Install Tips

• Powering the Transmitter: Insert fully charged AA batteries (or designated lithium battery pack) into the rear battery compartment, paying close attention to polarity markings (+/-).

• Binding to F112S Helicopter Receiver: Place the helicopter on a flat, level surface and plug in its main flight battery; power on the transmitter while holding the bind key until the color screen indicates successful bi-direction signal pairing.

• Verifying Telemetry Feedback: Check the color LCD screen to confirm real-time battery voltage readouts and GPS satellite icon updates before spooling up the motors.

• Pre-Flight Control Surface Calibration: Perform a stick calibration check via the screen menu and verify that all 9 channels (switches, gimbals, and flight mode toggles) respond smoothly without input lag.

More Spare Parts & Accessories

Support & Warranty

• 3-month warranty on manufacturing defects
• Ships worldwide