RC ERA C170 Servo Replacement Pack for 1:48 Scale Longbow Apache Helicopter

Fix Erratic Swashplate Tilting, Eliminate Mid-Air Wobbling, and Restore Razor-Sharp Collective Control During 3D Stunt Flights

The cyclic steering servos are the critical mechanical links that tilt the swashplate, directly dictating pitch and roll inputs for your flybarless main rotor system. For a high-performance 1:48 scale model like the RC ERA C170 Longbow Apache, executing aggressive inversions, tight banks, or sudden altitude shifts puts massive continuous stress on the internal servo gear trains. If your helicopter suffers a hard crash, blade strike, or tip-over landing, the sudden backward shock can easily strip plastic gear teeth, burn out internal potentiometers, or cause servo centering failure. Flying with a jittery or damaged servo leads to poor response times, dangerous directional drifting, or an uncontrollable roll-over. Replacing your compromised actuators with this factory-original RC ERA C170 servo group instantly restores crisp swashplate tracking, absolute cyclic precision, and locked-in handling during intense 3D aerobatic flights.  Ships worldwide.

Product Highlights

• Tailored Swashplate Geometry Matching: Engineered to perfectly fit the factory molded frame slots of the 1:48 Apache scale fuselage for zero mechanical slop.

• High-Visibility Lightweight Plastic Housing: Features an impact-resistant orange composite shell as shown in _cgi-bin_mmwebwx-bin_webwxgetmsgimg__&MsgID=5893600064274623660&skey=@crypt_54ba275d_8a9bdb8964eff1b47adc22807f02f2bd&mmweb_appid=wx_webfilehelper.jfif that keeps aircraft curb weight to a minimum.

• Pre-Assembled White Output Arm: Comes straight from the factory with the matching arm and center retaining screw secured, cutting down your maintenance bench time.

• Pre-Terminated Low-Resistance Wiring: Equipped with a flexible three-wire color-coded harness and terminal plug designed to plug directly into the flybarless main control receiver board.

Compatibility

For the RC ERA C170 1:48 Scale Longbow Apache RC Helicopter only.
Full model page (specs & photos):

https://www.kidstoylover.com/products/rc-era-c170-1-48-scale-longbow-apache-rc-helicopter

What’s in the Box

• 1 x RC ERA C170 Servo

Install Tips

• Accessing the Internal Servo Bay: Carefully unscrew and split open the forward scale cockpit fuselage shell segments; locate the damaged orange servo unit and disconnect its wiring harness plug from the main receiver circuit board sockets.

• Seating the Replacement Micro Servo: Slide the fresh orange servo body shown in _cgi-bin_mmwebwx-bin_webwxgetmsgimg__&MsgID=5893600064274623660&skey=@crypt_54ba275d_8a9bdb8964eff1b47adc22807f02f2bd&mmweb_appid=wx_webfilehelper.jfif directly into the structural chassis mounts; secure the mounting lugs with your original self-tapping hardware without over-tightening the composite casing tabs.

• Powering Up for Electronic Stick Centering: Plug the wire harness back into the designated 4-channel slot on the receiver; turn on your transmitter and power up the helicopter with the motor disconnected to let the new servo find its true electrical center position automatically.

• Swashplate Leveling and Pre-Flight Checks: Snap your linkage pushrods back onto the white servo output arm ball studs; adjust the mechanical rod lengths as needed until the swashplate sits perfectly horizontal and level, ensuring tracking clearance before reassembling your Apache fuselage.

Spare Parts & Accessories

Find remote control，battery，USB，carcase clips，screwdriversand more in the dedicated parts collection

https://www.kidstoylover.com/collections/rc-era-c170-rc-helicopter-spare-parts-accessories

Support & Warranty

• 3-month warranty on manufacturing defects
• Ships worldwide