Verfügbarkeit für Abholungen konnte nicht geladen werden
Main Linkage Rod Set for RC ERA C190 Brushless Helicopter
Fix Erratic Flight and Trim Issues
Bent or "stretched" linkage rods are the primary cause of a helicopter that refuses to stay trimmed or wobbles during transitions. These official RC ERA C190 linkage rods solve control accuracy problems by providing a rigid, slop-free connection between the servos, swashplate, and rotor head, ensuring your Optical Flow positioning remains rock-solid. Ships worldwide.
Product Highlights
Factory-Calibrated Lengths: Each rod is molded to the exact length required for the C190’s geometry, eliminating the need for complex manual measurements.
Low-Friction Ball Sockets: Designed to snap securely onto the ball joints while allowing frictionless rotation for smooth cyclic and collective response.
High-Impact Polymer: Resilient enough to pop off during a crash (to protect your servos) rather than snapping under moderate stress.
Full Set Coverage: Includes all necessary links for the main rotor control system to ensure a complete refresh of your helicopter’s mechanical timing.
Pliers Usage: Use specialized ball-link pliers to snap the rods on and off; using needle-nose pliers can easily scratch the balls or deform the plastic sockets.
Directional Fit: Most ball links have a "branded" or slightly larger side meant to face outward; pay attention to the orientation of the old rods during removal.
Level Check: After replacing all links, power on the helicopter to verify that the swashplate is level at the neutral stick position before your next flight.
Support & Warranty
Expert help to choose the right RC ERA C190 spare parts
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...