Verfügbarkeit für Abholungen konnte nicht geladen werden
VolantexRC F-16 Landing Gear Set - Replacement Wheels & Struts
Ensure Smooth Takeoffs and Safe Touchdowns
Bent struts or missing wheels can lead to "ground loops" or wing-tip strikes during landing. This VolantexRC F-16 Landing Gear set solves the problem of unstable ground handling. Specifically designed for the tricycle configuration of the Falcon, this set provides the necessary ground clearance and stability for taking off from smooth runways or short-cut grass, protecting your underside and propeller. Ships worldwide.
Product Highlights
Tricycle Configuration: Includes the steerable front nose gear and the main rear landing struts for a complete undercarriage overhaul.
High-Strength Spring Steel: The struts are designed to flex slightly on impact, absorbing the energy of firm landings to protect the internal mounting blocks.
Low-Friction Wheels: Features lightweight, durable wheels that spin freely to reduce drag during the takeoff roll, helping your brushless jet reach lift-off speed faster.
Easy Plug-In Design: Engineered for a quick press-fit installation, allowing you to swap between landing gear and "belly landing" mode in seconds.
Directional Alignment: Ensure the nose wheel is perfectly straight when your rudder servo is at neutral to prevent the jet from veering off the runway during takeoff.
Strut Seating: Push the wire struts firmly into the plastic mounting slots until they "click" or seat fully to prevent them from falling out in flight.
Wheel Retention: Periodically check the wheel stoppers to ensure the wheels remain securely on the axles after multiple landings on hard surfaces.
Support & Warranty
Expert help to choose the right VolantexRC F-16 spare parts
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Einsteigerfreundlicher Warbird, vom Piloten empfohlen: Der MoFly P-51D 690mm fliegt auf 2S sehr weich, mit 6-Achs-Stabi und Stunt-Tasten. Sieh dir den kompletten Testflug & das Setup an.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Praxis-Review des QIDI 580 SR22 RTF RC-Flugzeugs: 5-Minuten-Montage, Gyro-Modi, Flugleistung, Tipps zu koordinierten Kurven und für wen das Modell geeignet ist.
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...
Ist der Trainstar 500mm das richtige Brushless-RTF für dich? Tim McKay macht das Unboxing, erklärt Setup und Stabilisierungsmodi und fliegt den Erstflug auf 2S – sieh dir die echte Performance...