{"product_id":"rc-era-c184-tail-wing-stabilizer-set-for-1-48-scale-md530-rc-helicopter-red-white-gray","title":"RC ERA C184 Tail Wing Stabilizer Set for 1\/48 Scale MD530 RC Helicopter (Red-White\/Gray)","description":"\u003ch1\u003eRC ERA C184 Tail Wing Stabilizer Set for 1\/48 Scale MD530 RC Helicopter (Red-White\/Gray)\u003c\/h1\u003e\n\u003chr\u003e\n\u003ch2\u003eFix Cracked Fin Structures, Eliminate Tail-Heavy Drifts, and Restore Authentic MD530 Aerodynamic Stability\u003c\/h2\u003e\n\u003cp data-path-to-node=\"5\"\u003eThe empennage tracking fins—consisting of the swept vertical stabilizer and the horizontal stabilizer assembly—are critical aerodynamic surfaces that prevent unwanted yaw and pitch oscillation. For an agile 1\/48 scale multi-rotor model like the RC ERA C184 MD530, executing rapid banking turns or fast forward transitions in 3D stunt mode puts significant air pressure on these thin protruding plastic panels. During hard landings, unexpected tail-first wall clips, or grass tumbles, these delicate stabilization fins can crack, warp, or snap off completely at the mounting roots. Flying with a damaged or missing tail stabilizer compromises the aircraft’s natural tracking, forcing the internal gyro and optical flow positioning systems to overcompensate, which drains battery power and induces annoying tail shudders. Replacing your cracked panels with this factory-original tail wing set immediately snaps your fuselage back into aerodynamic equilibrium and restores its pristine scale appearance.  \u003cstrong\u003eShips worldwide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 data-path-to-node=\"8\"\u003eProduct Highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eComplete Multi-Plane Stabilizer Package:\u003c\/b\u003e Contains both the vertical stabilizer fin (featuring the scale curved rear antenna tip) and the horizontal wing segment with integrated vertical endplates as shown\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,1,0\"\u003e\u003cb data-path-to-node=\"12,1,0\" data-index-in-node=\"0\"\u003eAuthentic Factory Color Profiling:\u003c\/b\u003e Available in official matte red-white \/ grey finish options to match your stock MD530 livery perfectly without showing ugly repair contrast lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,2,0\"\u003e\u003cb data-path-to-node=\"12,2,0\" data-index-in-node=\"0\"\u003eImpact-Resistant ABS Polymer Composition:\u003c\/b\u003e Molded from lightweight yet structurally rigid plastic composites that withstand high aerodynamic stress while keeping weight off the tail boom.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,3,0\"\u003e\u003cb data-path-to-node=\"12,3,0\" data-index-in-node=\"0\"\u003ePre-Molded Through-Hole Fastener Mounts:\u003c\/b\u003e Features factory-drilled centering screw ports and snap alignment pegs designed to slide directly into the tail boom brackets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp data-path-to-node=\"10,0,0\"\u003eFor the \u003cstrong\u003eRC ERA C184 MD530\u003c\/strong\u003e only.\u003cbr\u003eFull model page (specs \u0026amp; photos):\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.kidstoylover.com\/collections\/rc-era-c184-rc-helicopter-spare-parts-accessories\"\u003ehttps:\/\/www.kidstoylover.com\/collections\/rc-era-c184-rc-helicopter-spare-parts-accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RC ERA C184 Tail Wing (Red-White\/Gray)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003eClearing Broken Stabilizer Stubs:\u003c\/b\u003e Back out the micro retention screws located on the side of the rear tail boom pod casing; slide the broken vertical or horizontal fin fragments out of their internal holding slots and clear away any trapped debris.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,1,0\"\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003eInstalling the Vertical Stabilizer Fin:\u003c\/b\u003e Slide the mounting root tabs of the new vertical fin into the top vertical recess slot of the tail boom; ensure the curved tail antenna extension points rearward and downward.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,2,0\"\u003e\u003cb data-path-to-node=\"14,2,0\" data-index-in-node=\"0\"\u003eSeating the Horizontal Wing Assembly:\u003c\/b\u003e Take the cross-stabilizer panel containing the dual side endplates; push the central alignment sleeve straight into the horizontal lower slot tracks of the tail structure until the factory screw holes line up perfectly with the internal chassis plastic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,3,0\"\u003e\u003cb data-path-to-node=\"14,3,0\" data-index-in-node=\"0\"\u003eLocking the Fasteners and Tracking Test:\u003c\/b\u003e Re-insert the original metric frame screws through the molded alignment ports and tighten gently until snug; manually inspect the surfaces from the front of the model to ensure the horizontal wing sits exactly 90 degrees square to the main rotor shaft before clearing your helicopter for high-speed flight.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpare Parts \u0026amp; Accessories\u003c\/h2\u003e\n\u003cp\u003eFind remote control，battery，USB，carcase clips，screwdriversand more in the dedicated parts collection\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.kidstoylover.com\/collections\/rc-era-c184-rc-helicopter-spare-parts-accessories\"\u003ehttps:\/\/www.kidstoylover.com\/collections\/rc-era-c184-rc-helicopter-spare-parts-accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSupport \u0026amp; Warranty\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-month warranty\u003c\/strong\u003e on manufacturing defects\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips worldwide\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidstoylover","offers":[{"title":"Red-White","offer_id":43520716832835,"sku":null,"price":20.0,"currency_code":"CAD","in_stock":true},{"title":"Gray","offer_id":43520716865603,"sku":null,"price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/8313\/1203\/files\/5r.jpg?v=1783769801","url":"https:\/\/www.kidstoylover.com\/tr-ca\/products\/rc-era-c184-tail-wing-stabilizer-set-for-1-48-scale-md530-rc-helicopter-red-white-gray","provider":"Kidstoylover","version":"1.0","type":"link"}